Susan Road, Faisalabad Workshop•Direct Delivery & Fitting Across Punjab & Lahore•Mon–Thu, Sat–Sun 9am–9pm

Steel gates in Faisalabad

We fabricate heavy-duty entrance gates in Faisalabad, available in motorized sliding, cantilever, and swing configurations using precision SHS tubular frames and decorative steel inserts.

Mild steel or AISI 304 stainless, 1.5 mm to 2.0 mm (14 to 16-gauge)

Custom architectural steel entrance gate, Faisalabad

Reference image

Get a price on WhatsApp

Specification

Gates specification
GradeStructural mild steel (MS) or AISI 304 stainless steel
Thickness1.5 mm to 2.0 mm (14-gauge to 16-gauge) or engineered per structural load
WeldingFull-penetration MIG & TIG structural welds
FinishZinc-rich anti-corrosion primer + polyurethane finish coating or satin stainless
SizesBuilt to exact driveway or entrance opening dimensions
OptionsSliding on V-groove track, cantilever track, or bi-parting swing hinges; motor-ready brackets
IncludedStructural gate frame, custom infills, heavy hinges/rollers, locking hardware

How we quote

Send your measurements on WhatsApp and we quote in writing, with the grade and thickness stated.

What changes the cost:

  • Material choice (Mild steel vs stainless)
  • Hollow section & sheet thickness (14G / 16G)
  • Design complexity & fabrication hours
  • Protective coating & paint grade
  • Delivery & site installation

Not sure which grade you need? Read 304 vs 316 vs mild steel.

Questions about gates

Do you prepare the gate for Italian or local automated gate motors?

Yes. We weld integrated motor mounting plates, gear rack brackets, and concealed electrical conduit channels so your automation installer can attach motors without grinding or cutting.

How do you protect entrance gates against rust and monsoons in Punjab?

All mild steel gates undergo thorough scale de-greasing, followed by two coats of zinc-rich epoxy anti-rust primer and a heavy industrial polyurethane topcoat resistant to UV fading.

What steel wall thickness do you recommend for heavy driveway gates?

We recommend a minimum of 2.0 mm (14-gauge) or 2.5 mm square hollow sections (SHS) for the outer structural frame to prevent hinge sagging over long spans.

Send us your measurements