Susan Road, Faisalabad Workshop•Direct Delivery & Fitting Across Punjab & Lahore•Mon–Thu, Sat–Sun 9am–9pm

304 vs 316 vs mild steel: which grade do you need?

The grade and the thickness of the steel decide most of the price. This page explains both in plain words, so you can compare any two quotes.

The three materials

Steel grades compared
304 stainlessThe standard food-grade stainless steel. Good for prep tables, sinks, shelves and hoods in most kitchens. Does not rust in normal kitchen use.
316 stainlessContains molybdenum, so it resists salt and strong cleaning chemicals better. Worth the extra cost near the sea, with heavy salt use or harsh chemicals. Costs more than 304.
Mild steelPlain steel, the cheapest option. It rusts unless it is painted or coated. Right for gates, frames and structural work. Not for food contact.

Gauge to millimetre chart (ASTM A240 / A480 Standard)

Gauge numbers get smaller as the sheet gets thicker. Gauge standards vary across manufacturers (e.g. Manufacturers’ Standard Gauge vs. nominal millimetres), so we always quote and verify nominal thickness directly in millimetres using digital micrometers.

ASTM A240 / A480 Standard & Caliper Verification

We reference nominal sheet thicknesses under the ASTM A240 / A480 manufacturing standard (e.g. 1.2 mm nominal ~18G, 1.5 mm nominal ~16G, 2.0 mm nominal ~14G). We encourage all clients, chefs, and engineers visiting our Susan Road workshop to bring their own digital micrometer and verify sheet thickness directly against their written quotation.

Note on Magnetic Permeability: While raw annealed 300-series austenitic stainless steel is non-magnetic, mechanical cold shearing and heavy bending can induce slight localized magnetic permeability near deformed edges without altering the chemical alloy purity or corrosion resistance.

Stainless steel sheet gauge to millimetres
GaugeThicknessCommon use
10 gauge3.0 - 3.4 mmHeavy structural bases and load-bearing framing
12 gauge2.5 - 2.7 mmSevere industrial machine skids and gates
14 gauge2.0 mmHeavy structural gate frames and industrial tanks
16 gauge1.5 mmCommercial cookline tables, deep sinks, high-impact prep
18 gauge1.2 mmStandard hospitality prep tables, shelves, exhaust hoods
20 gauge0.9 mmLight cladding panels, appliance covers, backsplashes

The three thicknesses we ask about most are 1.0 mm, 1.2 mm and 1.5 mm. 1.2 mm is about 18 gauge and 1.5 mm is about 16 gauge.

Why a cheaper quote can be cheaper

  • The sheet is thinner. A thin top dents and flexes sooner.
  • The grade is lower, or it is not named at all.
  • The quote says "stainless steel" and nothing else.

That is why every quote from us names the grade and the thickness in millimetres. See how we quote.

Ask us which grade you need